Iron Fence & Gate Contractor in Stockton, CA
Custom iron and steel fencing, driveway gates, and security fencing built in our own Sacramento shop and installed by our crew throughout Stockton and San Joaquin County. Free on-site estimates.
Iron-Caz Fencing Corp is a family-run iron and steel fence shop based at 5526 Auburn Blvd in Sacramento, about 45 minutes up Highway 99 from Stockton. We regularly work throughout San Joaquin County, from the older homes along the Miracle Mile and Pacific Avenue to the waterfront lots in Brookside and the tree-lined streets of Lincoln Village West. Because we fabricate every fence and gate in-house and install with our own crew, you deal with the same people from the first measurement to the final weld.
Stockton sits at the edge of the San Joaquin Delta, where very hot, dry summers run straight into wet winters. That mix is hard on fencing, so we finish our ironwork with hot-dip galvanizing and powder coat to hold up against the heat, humidity off the channel, and seasonal rain. Whether you need a decorative front-yard fence, a secure perimeter for a warehouse near the port, or a worn-out gate brought back to life, we build it to last in the Valley climate.
Related: Wrought Iron Fences · Automatic Driveway Gates · Iron Fencing in Modesto · Iron Fencing in Lodi
Custom Iron & Steel Fencing for Stockton Homes
Wrought iron remains the go-to choice for Stockton's older neighborhoods, where homeowners near the Miracle Mile and downtown want fencing that suits early-1900s architecture without the upkeep of original ironwork. We design pickets, finials, and panel layouts to match the house, then fabricate everything in our own shop so the proportions and spacing are right before anything reaches your yard.
For newer builds in Spanos Park, Weston Ranch, or Lincoln Village West, we also do clean modern looks: flat-top panels, welded-wire infill, and horizontal slat designs that read contemporary while still giving you a steel structure underneath.
- Classic wrought iron with spear, ball, or fleur-de-lis finial options
- Modern flat-top, horizontal slat, and welded-wire styles
- Wood and iron combination fencing for privacy with a steel frame
- Powder-coat and galvanized finishes rated for hot summers and wet Delta winters
- In-house fabrication and decorative metalwork, no subcontractors
Driveway Gates & Automated Openers in Stockton
A custom gate sets the tone for the whole property, and on Stockton's larger lots and waterfront homes it also handles real access and security. We build matching driveway and pedestrian gates in iron or steel, then pair them with the right operator for your layout, whether that's a swing gate on a Brookside frontage or a sliding gate for a tighter urban driveway.
We size the opener to the gate's weight and your daily use, and wire in keypads, remotes, intercoms, or sensors so the system is convenient and safe for vehicles and pedestrians alike.
- Custom swing and sliding driveway gates fabricated to your opening
- Matching pedestrian and side gates
- Automatic gate operators with keypads, remotes, and safety sensors
- Repair and re-automation of existing gates that stick, sag, or won't open
- Hinges, posts, and hardware built to handle daily heavy use
Security Fencing, Railings & Iron Repair
Steel fencing does double duty in Stockton, where commercial yards near the inland port and homeowners alike want a real deterrent. We install anti-climb and security fencing with tight picket spacing and few footholds, sized for warehouses, lots, and residential perimeters that need genuine protection rather than just a property line.
We also handle the smaller iron work that keeps a property safe and code-compliant, plus repairs on fencing that has rusted or been damaged. If your existing iron is structurally sound, repairing and refinishing it is often cheaper than full replacement.
- Anti-climb and security fencing for homes and commercial sites
- Iron handrails and railings for steps, porches, and ramps
- Pool-area fencing built to California safety code
- Repair of rusted, bent, or damaged iron fences and gates
- Custom welding and fabrication for one-off pieces
Iron we've built
Modern horizontal-slat gate
Stained wood privacy fence with steel posts
Custom iron driveway gate and fence
Spear-top iron security fenceSee more in our full project gallery →
Common questions
Does Iron-Caz Fencing serve Stockton if you're based in Sacramento?
Yes. Our shop is at 5526 Auburn Blvd in Sacramento, and Stockton is well within our roughly 80-mile service area. We work throughout San Joaquin County regularly. Call (916) 307-0543 for a free on-site estimate.
Will iron fencing hold up to Stockton's hot summers and wet winters?
That's exactly why we finish our ironwork with hot-dip galvanizing and powder coat. Those finishes resist rust through the long dry, hot summers and the wet winters and Delta humidity, so the fence stays solid for years.
Can you build a custom driveway gate with an automatic opener?
Yes. We fabricate custom swing and sliding gates in our own shop and install the matching operator, sized to the gate and your driveway, with keypads, remotes, and safety sensors. We can also automate or repair an existing gate.
Do you repair existing iron fences and gates, or only install new ones?
We do both. If your iron is structurally sound, we can repair rust, bent sections, sagging gates, and worn hardware, then refinish it, which is usually less expensive than full replacement. We'll tell you honestly which makes sense during the estimate.
Get a Free Iron Fence Estimate in Stockton
Call Iron-Caz Fencing Corp at (916) 307-0543 to schedule your free on-site estimate. Licensed and insured, CSLB #1129247, with 15+ years building custom iron fences and gates across the Sacramento Valley and Stockton.