Iron Fence & Fence Contractor in Davis, CA
Custom-fabricated iron and steel fencing, driveway and pedestrian gates, railings, and repairs for Davis homes and businesses. Built in our own shop, installed by our own crew.
Iron-Caz Fencing builds custom iron and steel fencing for Davis homeowners and businesses. We're a family-run shop based nearby at 5526 Auburn Blvd in Sacramento, an easy run down I-80 to Davis, and we've spent 15+ years fabricating and installing fences across the Sacramento Valley. Whether you're in a 1970s ranch in North Davis, a 1950s home in East Davis near Mace Ranch, or a newer build out toward Wildhorse, we measure on-site and build to fit your lot.
Davis is a bike town with a real outdoor streak, so a lot of what we do here is about defining a yard without walling it off: open-picket iron that keeps the view, secure side gates that survive daily bike traffic, and pool-code fencing that meets California requirements. Everything is fabricated in our own shop and finished with powder-coat or galvanizing to stand up to the hot Central Valley summers and damp winters. We are licensed and insured, CSLB #1129247, and every estimate is free.
Related: Wrought Iron Fences · Automatic Driveway Gates · Iron Fencing in Woodland · Iron Fencing in Vacaville
Custom Iron Fencing for Davis Homes
Our core work is custom wrought iron and steel fencing, cut and welded to your property line rather than ordered in fixed panels. That matters on Davis lots, where mature trees, established gardens, and bike-friendly setbacks rarely run in straight, standard lengths. We can match a traditional picket profile with spear, ball, or fleur-de-lis finials for an older home near Downtown and Central Park, or run a clean modern horizontal slat fence for a newer build.
For homeowners who want privacy without an all-metal look, we also build wood-and-iron combination fences that pair a powder-coated steel frame with wood infill. It's a popular middle ground for backyards and side yards that face shared paths or greenbelts.
- Custom-welded iron and steel fences fabricated in-house to your exact measurements
- Traditional picket styles with spear, ball, or fleur-de-lis finials
- Modern horizontal slat and welded-wire designs for newer Davis builds
- Wood and iron combination fencing for privacy with a steel backbone
- Powder-coat and galvanized finishes built for Valley summers and wet winters
Driveway Gates, Automated Openers & Anti-Climb Fencing
We build custom driveway and pedestrian gates to match your fence, from a simple swing gate to a wider sliding gate for a deeper Davis lot or shared drive. When you want it powered, we install gate operators and openers sized to the gate, so it opens reliably whether you're heading to campus or coming home after dark.
For added security, we fabricate anti-climb fencing with tighter pickets and minimal footholds, a sensible choice for businesses near downtown, equipment yards, and rental properties around the UC Davis area. Pool fencing is built to California safety code with self-closing, self-latching gates.
- Custom swing and sliding driveway gates matched to your fence
- Automated gate operators and openers, properly sized and installed
- Pedestrian and side-yard gates built to handle daily bike traffic
- Anti-climb security fencing for homes, rentals, and commercial sites
- Pool-code fencing with self-closing, self-latching gates
Iron Railings, Repairs & Custom Metalwork
Beyond fencing, we fabricate iron handrails and railings for porches, steps, and balconies, built to code and finished to match your trim or existing ironwork. Our shop also handles decorative metalwork and one-off welding and fabrication projects when you want something that isn't off a catalog.
If your existing fence or gate is sagging, rusting, or no longer latching, we repair iron fences and gates too. Because we weld and finish in-house, we can re-hang a gate, replace damaged sections, or refinish rusted iron rather than telling you to start over.
- Custom iron handrails and railings for steps, porches, and balconies
- Iron fence and gate repair: re-hanging, re-welding, rust treatment
- Section replacement and refinishing instead of full teardown
- Decorative metalwork and custom welding fabricated in our own shop
- One crew start to finish, no subcontractors on your property
Iron we've built
Decorative iron porch railing
Arched wood and iron gate
Modern horizontal-slat gate
Stained wood privacy fence with steel postsSee more in our full project gallery →
Common questions
Do you serve all of Davis, CA?
Yes. We're based at 5526 Auburn Blvd in Sacramento and serve all of Davis, including Downtown, North Davis, East Davis, and West Davis, plus the surrounding areas within about 80 miles. Davis is a short trip down I-80 for our crew.
Can you build a fence that keeps an open view, like along a greenbelt or bike path?
Definitely. Open-picket iron fencing is one of our most requested styles in Davis because it secures a yard without blocking the view of a greenbelt, park, or bike path. We can also do wood-and-iron combinations if you want privacy in some sections and openness in others.
Do you install automatic gates and openers?
Yes. We fabricate custom driveway and pedestrian gates and install gate operators and openers sized to the gate and your daily use. We handle both swing and sliding gates depending on your lot and driveway.
Can you repair an existing iron fence or gate instead of replacing it?
In most cases, yes. Because we weld and finish in our own shop, we can re-hang a dragging gate, re-weld broken joints, replace damaged sections, and treat rust. Call (916) 307-0543 for a free on-site look before deciding on a full replacement.
Get a Free Iron Fence Estimate in Davis
Family-run, licensed and insured (CSLB #1129247), with 15+ years fabricating and installing iron fencing across the Sacramento Valley. Call (916) 307-0543 for a free on-site estimate in Davis.