Iron Fence & Fence Contractor in Citrus Heights, CA
Iron-Caz Fencing builds and installs custom iron fences, driveway gates, and security fencing for Citrus Heights homes and businesses. Fabricated in our own Sacramento shop, installed by our own crew.
Citrus Heights sits just up Auburn Boulevard from our shop, and we work here constantly, from the established streets around Sylvan Corners and Rusch Park to the newer developments north of Greenback Lane. The city grew out of old citrus groves and incorporated in 1997, so the housing runs the full range: mid-century ranch homes on deep lots, 1980s tract neighborhoods, and larger custom properties where a wrought iron fence or a welded driveway gate makes a real difference in curb appeal and security.
We are Iron-Caz Fencing Corp, a family-run shop based nearby at 5526 Auburn Blvd, Sacramento. We specialize in custom iron and steel fencing, but we also handle wood and iron combinations, automated gates, repairs, and decorative metalwork. Everything is fabricated in-house and installed by our own team, never subcontracted. Call (916) 307-0543 for a free on-site estimate.
Related: Wrought Iron Fences · Automatic Driveway Gates · Iron Fencing in Fair Oaks · Iron Fencing in Orangevale
Custom Iron & Steel Fences for Citrus Heights Homes
An iron fence holds up far better than wood in the Sacramento Valley climate, where hot, dry summers and wet winters chew through softer materials. We build each fence to fit the property, whether that is a low decorative panel along a front yard near Sylvan Corners or a taller boundary line on a deep lot off Antelope Road.
Pickets can be topped with classic spear, ball, or fleur-de-lis finials, and every job gets a powder-coat or galvanized finish so it resists rust for years on those long summer days.
- Custom-fabricated iron and steel panels sized to your lot, not pre-cut kits
- Spear, ball, and fleur-de-lis finial options for traditional or modern looks
- Powder-coat and galvanized finishes built for hot summers and wet winters
- Matching gates and panels welded in-house for a consistent design
- Styles to suit ranch homes, tract neighborhoods, and custom properties
Driveway Gates, Automated Openers & Security Fencing
Many Citrus Heights properties have wide driveways and corner lots that are ideal for a custom driveway or pedestrian gate. We fabricate swing and sliding gates, then pair them with reliable gate operators, keypads, and remotes so you can come and go without leaving the car.
For homeowners and businesses near busier corridors like Greenback Lane or Auburn Boulevard, we also build anti-climb and security fencing with tighter picket spacing and reinforced framing to deter trespassers.
- Custom swing and sliding driveway gates fabricated to your opening
- Automated gate openers with keypads, remotes, and safety sensors
- Pedestrian and side-yard gates that match your fence line
- Anti-climb security fencing with narrow spacing and reinforced posts
- Commercial-grade fencing and gates for Citrus Heights businesses
Wood & Iron Combinations, Railings & Fence Repair
Not every project calls for full iron. A wood and iron combination fence gives you privacy with a stronger steel frame, a practical choice for backyards on the older, tree-lined lots common across the city. We also fabricate iron handrails and railings for porches and steps, plus modern horizontal slat and welded-wire styles for newer homes.
If your existing iron fence or gate is sagging, rusting, or hanging off its hinges, we repair it. Our in-house welding shop means we can match older sections and rebuild damaged gates rather than replacing the whole run.
- Wood and iron combination fences for privacy with added strength
- Iron handrails and railings for porches, steps, and entryways
- Modern horizontal slat and welded-wire fencing for contemporary homes
- Repair of sagging gates, rusted panels, and damaged posts
- In-house custom welding and fabrication to match existing ironwork
Iron we've built
Decorative iron porch railing
Arched wood and iron gate
Modern horizontal-slat gate
Stained wood privacy fence with steel postsSee more in our full project gallery →
Common questions
Do you serve all of Citrus Heights?
Yes. We are based just down Auburn Boulevard in Sacramento and regularly work throughout Citrus Heights, from Sylvan Corners and the Rusch Park area to neighborhoods near Greenback Lane, Antelope Road, and the Sunrise corridor. We cover Sacramento plus roughly 80 miles.
How long does an iron fence last in the Sacramento Valley climate?
With a proper powder-coat or galvanized finish, a well-built iron fence holds up for decades through the hot, dry summers and wet winters here. We finish every fence and gate to resist rust, which is the main thing that shortens the life of metalwork in this climate.
Can you build a fence that meets pool safety code?
Yes. We build iron fencing with picket spacing and heights that meet California pool barrier requirements, and we can add self-closing, self-latching gates. Let us know during the free estimate and we will size everything to code for your property.
Do you repair existing iron fences and gates, or only install new ones?
Both. Because we have our own welding shop, we can repair sagging gates, replace rusted sections, fix broken hinges, and match older ironwork rather than forcing a full replacement. We will tell you honestly whether a repair or a new build makes more sense.
Get a Free Iron Fence Estimate in Citrus Heights
Call Iron-Caz Fencing at (916) 307-0543 for a free on-site estimate. Family-run, licensed and insured (CSLB #1129247), with 15+ years building custom iron fences and gates across Citrus Heights.